Spherical Roller Bearing
Product Specification

A spherical bearing is a bearing that permits angular rotation about a central point in two orthogonal directions (usually within a specified angular limit based on the bearing geometry). Typically these bearings support a rotating shaft in the [bore] of the inner ring that must move not only rotationally, but also at an angle.

Spherical bearings can be of a hydrostatic or mechanical construction. A spherical bearing by itself consists of an outer ring and an inner ring and a locking feature that makes the inner ring captive within the outer ring in the axial direction only. The outer surface of the inner ring and the inner surface of the outer ring are spherical and are collectively considered the raceway and they slide against each other, either with a lubricant, a maintenance-free or they incorporate a rolling element such as a race of ball-bearings, allowing lower friction. Spherical bearings are used in countless applications, wherever rotational motion must be allowed to change the alignment of its rotation axis.

Bearing No. d D T B C R Mass
23260 300.000 540.000 - 192.00 - - 190.00
23264 320.000 580.000 - 208.00 - - 240.00
24024 120.000 180.000 - 60.000 - - 5.400
24026 130.000 200.000 - 69.000 - - 7.950
24028 140.000 210.000 - 69.000 - - 8.450
24030 150.000 225.000 - 75.000 - - 10.500
24032 160.000 240.000 - 80.000 - - 13.000
24034 170.000 260.000 - 90.000 - - 17.500
24036 180.000 280.000 - 100.00 - - 23.000
24038 190.000 290.000 - 100.00 - - 24.000
24040 200.000 310.000 - 109.00 - - 30.500
24044 220.000 340.000 - 118.00 - - 39.500
24048 240.000 360.000 - 118.00 - - 43.000